13
1-8)
•
“
LED_B
＂
flashes
slowly
4
Press the program/EP
button on the target
device
•
“
OK
＂
LED flashes
once and stays on
•
“
LED_B
＂
keep
blinking slowly
5
Adjust the target device
on/off or dim level with
its program button, to the
desired status
-
6
Press
•
“
OK
＂
LED flashes
once then turns off
•
“
LED_B
＂
off
•
The current status of the
device will be learned
and saved to a scene
successfully
Note1: Your target device must be included in the network before this
setup procedure, please refer to [Adding Device to the Network]
section.
Removing Device/End-point from a Scene
Step
Setup Key
LED Indication Status
1
Press
in Advance
Setup
•
The
“
OK
＂
light turns
on
2
Press
•
“
OK
＂
LED flashes
once and stays on
•
“
LED_A
＂
flashes
slowly
3
Select a scene number
from 1 to 16 (1-8 or
1-8)
•
“
OK
＂
LED flashes
once and stays on
•
“
LED_A
＂
off
•
“
LED_B
＂
flashes
slowly
4
Press the program/EP
button on the target
device
•
the
“
OK
＂
light stays
on then flashes once and
turns off
•
“
LED_B
＂
off
•
Device removed from the
