Issued: 01/21/10 REV 50
Doc# 27-0042UM
14
15
Issued: 01/21/10 REV 50
Doc# 27-0042UM
REMOVING THE POWER SUPPLY
1. Using a Philips screwdriver, remove
both screws from the rear top plate of the
Power Supply module
2. Inser t a finger into the handle and
begin to pull the module from the station.
3. Gently but f irmly continue to pull
the Power Supply module out of the
ZX1 station.
4. W hen the Power Supply module is
f a i r l y ex t r ac te d, l i f t a n d su p p o r t t h e
module away of the ZX1 station.
OPERATIONS
NOTE:
If one of the Power Supply
modules is removed, then the
system will still operate with the
one remaining power supply. A
failed power supply will be identifi ed
by an audible alarm.
INSERTING A POWER SUPPLY MODULE
1. Carefully position the Power Supply
module to the docking bay using both
hands for steady support.
3. As you reach the rear face of the ZX1
station, use your fi nger to provide extra
leverage for inser ting the module.
4. Use a Philips screwdriver to refasten
the security screws of the Power Supply
module to the ZX1 station.
2 . Inser t a f inger into the handle and
begin to firmly push the module into the
docking bay.
OPERATIONS
Summary of Contents for ZX1
Page 1: ...ZX1...
