Issued: 01/21/10 REV 50
Doc# 27-0042UM
18
19
Issued: 01/21/10 REV 50
Doc# 27-0042UM
1. To power up the Z X1, press and hold
(about 1 second) the Power Supply Switch
at the center right side of the unit.
2 . The unit control display may possibly
i n d i c a t e i t e m s t h a t r e q u i r e attention.
If such is the case, please refer to the
“Troubleshooting” in the Appendix.
3. The TranzPak 2 display may possibly
indic ate hard dr ive items that require
attention. If such is the case, please refer
to the “Troubleshooting” in the Appendix.
POWERING UP THE ZX1 STATION
OPERATIONS
1. Slide the locking catch towards the right
to allow the locking handle to spring open.
3. Push the locking handle to the lef t.
Using the locking handle, Gently but fi rmly
begin to pull the TranzPak2 module out as
it slides off the grounding contacts
4. When the TranzPak2 module is fairly
extracted, lif t and suppor t the module
away from the ZX1.
2. The locking handle will swing out.
REMOVING THE TRANZPAK2 MODULE
OPERATIONS
Summary of Contents for ZX1
Page 1: ...ZX1...
