9
BODY FRAME ASSEMBLY
1.ASSEMBLING OF BOTTOM BASE
1.Turn the Platform (49) upside down. Install the wheels (without brake)(47) in the screw
holes. Tighten with wrench (H). Note: The 2 wheels (without brake)(47) should be installed
on the side near the magnet base. Install the wheels (with brake)(48) into the screw holes.
Tighten with wrench (H). Note: The 2 wheels (with brake)(48) should be installed on the
other side.
2.Use the screws taken out from the Platform and assemble the magnet fixing plate (40) in
the original position.
3.Clip the magnets (34) into the square holes in the magnet fixing plate (40).
