12
STEP 7 - DRUM & BASE ASSEMBLY
TIPS:
1. Lock the rear wheels so the
Base doesn’t move around.
2. Use two people to lift the Drum
up onto the base.
3. Align the Base holes with the
threaded holes in the Drum.
4. Only tighten screws once all 4
are in place.
5. Do NOT fully tighten all screws
until doors are in place and
level.
STEP 8 - HOPPER & DRUM
Inside
Drum
Connect
Cable 1st!
TIPS:
1. Connect the Temperature Sensor cable BEFORE positioning the Hopper into the Grill Drum.
2. The Hopper is heavy so get assistance from a 2nd person when sliding into the Grill Drum
and attaching the bolts. Ensure the rear wheels are locked.
3. Finger tighten all 4 bolts evenly before tightening with the spanner. Do not over-tighten!
4. Neatly bundle the cable using the twist tie wire from the power cable. Slide the cable
bundle down between the Hopper and Drum.
Tuck cable down between
the Grill Drum and Hopper
52
Bolts and washers are
attached to the Hopper,
not in tool kit.
