13
·
Firmly press adhesive mounts into place and ensure full contact over the entire
surface.
Attach adhesive mounts in room temperature conditions.
·
Loop the circular ring of the Tether over the thumbscrew of the camera housing
·
and attach the other end to a secure anchor point. This will help prevent losing
the camera if it accidentally releases. To avoid injury do not use tether if
attaching camera to a helmet or other personal protective gear.
Mounting Accessories
·
2x Velcro Straps
2x Buckle Straps
·
4x Cable Ties
·
1x Tether
·
2x Replacement Adhesive Pads
·
1x Waterproof Data Cable
·
1x Cleaning Cloth
·
Note: To securely attach a mount please ensure you read the following instructions
below:
Attach adhesive mounts 72 hours before use (24 hours minimum) to ensure a
·
strong bond.
Adhesive mounts must be mounted on smooth surfaces to ensure a proper bond.
·
Apply adhesive mounts to clean surfaces only - wax, oil or dirt will weaken the
·
bond.