34
Build Reference
This tool is used to manually build a new reference that could be used as the
origin of the new reference frame for the facets.
Figure 2.25 - Build reference window
You can choose between 5 building modes:
Duplicate Reference:
Create a new reference from an
existing one.
3 Planes:
Create a reference by specifying
positioning features from 3 planes that
will define the axes of the coordinate
system.
1 Plane, 1 Line, 1 Point: Create a reference by specifying
positioning features on base plane, on
a reference line and a reference point.
3 Positioning targets:
Create a reference by specifying the
position of three targets.
3 References:
Create a reference with 3 other pre-
defined references.
In ZScan 1.3, it is now possible to rotate generated references around
the axes.
TIP: Follow the displayed instructions carefully to complete the
reference building procedure correctly.
