27
Surface
When selected, the surface is displayed in the 3D Viewer. The surface is a
representation of the object being scanned from a specific view points, this
is not the final result of the scan.
When selected, volume operation buttons are activated in the toolbar.
When selected, surface details and parameters will be displayed in the
expanding panel.
Facets
When selected, the facets are displayed in the 3d Viewer. The
facets are the final result of the scan. They are the final STL.
When selected, facets operation buttons are activated in the toolbar.
When selected, facets details are displayed in the expanding panel.
Recycle Bin
Node that contains all deleted facets patch for the current scan.
Each patch can be selected and restored in the active facets.
When selected, deleted patch will be displayed in the 3D viewer.
When selected, recycle bin details will be displayed in the expanding
panel.
Expanding Panel
This expanding panel will be shown when the Positioning Features root node
is selected in the tree. It contains genera l
information
about
the
positioning
model.
This expanding panel will be shown
when the Positioning Features root
node is selected in the tree. Optimize
Positioning Model will work on the whole
model to optimize features positions and
reduce deviation.
Figure 2.14 - Positioning features details
Positioning Features Details