ZPrinter
®
310 Plus Hardware Manual
Overview
2
All Rights Reserved
2/11/09
During printing, binder is first applied with a higher saturation to the edges of the part, creating a strong
“shell” for the part exterior. Next, an infrastructure that works like strong scaffolding is created for the part
walls, which are also built with a higher saturation of binder for added strength. The remaining interior
areas are printed with a lower binder saturation, which gives the part its stability.
After printing, the part is removed from the powder, depowdered, and dried. The part can then be infiltrated
with wax, or other performance resins, to increase strength and durability. For more information regarding
infiltrants, see
