Chapter 4 Advanced Settings Page 38
When the antenna alignment tool starts, the R2 Extender will issue beep sound to indicate current
RSSI. Once the tool is closed the R2 Extender will stop beeping. Frequency of beep indicate the
following RSSI:
Table 3 RSSI-Beep Frequency
RSSI
Beep Frequency
>-50 100
/sec
-50~-60 50
/sec
-60~-70 5
/sec
-70~-80
2 / sec
-80~-90 1
/sec
< -90
No beep sound
Link Test
Under Base Station, CPE or Peer-to-Peer (TDMA) mode when Antenna Alignment Tool is not available,
Link Test provides another option to check the signal strength towards the connecting device. Open “
Link
Test
” in “
Wireless
” as below, and click “
Refresh
” to view the current signal strength of wireless
connectivity. The table will be updated every 3 seconds. If the signal is not so good, align the antenna
manually.
