Chapter 5 Management Page 55
Enter the user name and password (Default user name/ password: admin/password) respectively,
you will see “
DEVICE123456>
”, which is the name of R2 Extender;
Enter
“
help
” command to get setting information; alternatively, you can refer to
Appendix C. SSH
Settings
for details.
SNMP
The R2 Extender supports SNMP management. Set the SNMP parameters and obtain MIB file before
remote management.
From
“
Remote Management
” in “
Management
”, set the parameters for SNMP:
-
Enable SNMP by checking “
Enable
”;
-
Specify the “
Read Community Name
”, “
Write Community Name
” and “
IP Address to Receive
Traps
”
-
Hit
“
Apply
” to save settings.
Obtain MIB file via FTP:
-
Enter
ftp 192.168.1.1 , username (Default: admin) and password (Default: password);
-
After successful login, enter command “
get bridge.mib
”, the information will as below and then
bridge.mib file is obtained.
Figure 42 Obtain MIB File
