Chapter 4 Advanced Settings Page 44
Only setting the same Authentication, Data Encryption and Key in the R2 Extender and
other wireless devices that connecting with it, can the communication be established!
Access Control
The Access Control appoints the authority to STA on accessing R2 Extender, thus a further security
mechanism is provided. This function is available only under Base Station and Peer-to-Peer (TDMA)
modes.
Open “
Access Control
” in “
Wireless
” as below, check “
Turn Access Control On
” to enable this function.
Figure 31 Access Control
Available CPEs
In this table lists the CPEs connecting with R2 Extender currently. Check the box before each MAC
address, click “
Add
” to add one or more available CPE(s) into the “
Trusted CPEs
” and click “
Apply
”
to save settings.
Add New CPE Manually
Enter the MAC address of the CPE that you would like to list into the access control list, click “
Add
”
