Z-Light 6TX/16TX/26TX Intelligent Direct Modulated Optical Transmitter
www.z-band.com
All Rights Reserved © 2018 Z-Band Technologies, LLC.
Phone: (866) 902-2606
- 21 -
FAX: (717) 249-3253
ABOVE: You can click
Session
on the left side menu at top to get back to the main menu
and then click the
Save
button on the right side to save this Session configuration for future
use. Click
Open
at the bottom to start a PuTTY session.
5.3 Operating Parameters Configuration
With the transmitter power off, use the serial port cable to connect the RS232 port with
the computer port. Open PuTTY which you have already set up. Click on the
Saved
Sessions
name that you saved your configuration to and click on
Load
. Click on
Open
to begin the session. With the serial cable connected, turn on the transmitter power, you
will see the page below. Enter the password to login. Z-Band Technologies, LLC.
sets up the factory default password as 123456.
After entering the password, the following screen will be displayed:
