Z-Light 6TX/16TX/26TX Intelligent Direct Modulated Optical Transmitter
www.z-band.com
All Rights Reserved © 2018 Z-Band Technologies, LLC.
Phone: (866) 902-2606
- 9 -
FAX: (717) 249-3253
3.2 Rear Panel
1 2 3 4 5 6 7 8 9 10 11
3.3 Power Module
3.3.1 110-240VAC Power Module
1
Mounting screws
2
110/240VAC power cord
input
3
Fuse
4
Power switch
No.
Name
Remark
1
Fan
Cooling air exhaust. Do not obstruct.
2, 3
RF/”Data” Input
RF and “Data” Input ports are both interchangeable as RF inputs
4, 5
RF/”Data” Test
RF input Test ports (-20dB compared to RF/”Data” input ports)
11
Ground Screw
Used for connecting the transmitter to building ground
6
Optical Signal
Output
CAUTION - LASER: This is the optical signal output port (standard
connector is SC/APC).
TURN OFF LASER OR REMOVE ALL
AC POWER BEFORE ACCESSING OR CONNECTING TO
THIS PORT.
7
RS232 interface
Console: used for configuring the network management parameters.
8
LAN interface
Corresponds to IEEE802.3 10Base-T, used for network management.
9, 10
Switching Power
Module
Hot pluggable, redundant 110-240VAC (50/60Hz)