www.z-band.com/866-902-2606
6
“GigaBUD 1000” Installation Guide
Front & Rear View of Z-Band Light TX
Video Sources CATV/Headend or –5
Fiber Output to Fiber Splitter
Figure 5
The Z-Band Light Transmitter accepts the coax Source signals at the “F”
connector input. The Status Light will be
Green
when the proper input levels
are received. The input level can be or – 5,
but it is best to get
them as close to 20dBmV as possible so that variations in input levels over
time can automatically be compensated for by the + or—5 tolerance.
The Transmitter will
maintain the Flat Signal levels
from the SC/APC
Singlemode Fiber output to each destination GigaBUD 1000 Fiber receiver .
Status Light
