Check the aspirator before using as per the installing and commissioning
sequence to ensure its good performances, afterwards, start operation by
connecting the suction conductor and the phlegm suction catheter already
sterilized.
Note: Please refer to the instructions before attempting to use the suction
catheter supplied with the aspirator.
Regulate the negative pressure as required for suction through the
regulating valve, open/close the switch based on the situation, and observe
frequently the liquid level in the holder in the process of operation. Stop
suction if the liquid level in the holder ascends to the rated capacity (still
applicable if slanting the aspirator 10 degree), and re-use it after empty and
clean-up. Otherwise, the float will rise as the liquid level ascends till the
valve is closed and suction stops automatically.
Note: Adopt the procedures mentioned in "Inspection & test on the overflow
device", if the liquid level still ascends after the overflow device has been
7
6
ClassⅡEquipment
OFF (Power )
KEEP DRY
KEEP UP
Alternating current
IPX0
Type B application part
ON (Power)
FRAGILE
Non-protective
Caution
Turn off the aspirator switch, and pull the power plug out of the socket to
shut off the power supply.
Stop running
Symbols
Description
Symbols
Description
Symbols
~
Application and maintenance
Application and Maintenance
Changing air filter
It is required to change air filter with the one produced by us in case of
foam or dusts fully accumulated in the air filter, which leads to gradually
darkening of the color of filter diaphragm and obviously reducing or even
disappearing of suction force at the inlet of tube while the negative
pressure indicated on the vacuum meter climbs up to 0.04 MPa or more.
Note 1: The suction force will
diminish or disappear, and the
negative pressure ascend if the
overflow device is closed, and
the tube blocked in the process
of application. Please refer to
"trouble Shooting".
Note 2: Necessary to frequently
change air filter and destroy it
centrally.
shut off.
Emergency measures in the process of application
(1) Quickly loosen the negative pressure regulating knob to release the
negative pressure if the suction catheter is blocked by strong phlegm and
mucus, and start suction again after changing the suction tube.
(2) Adopting the above method to loosen the negative pressure regulating
knob if it is not easy to take out the suction catheter after completion of
suction or the tube is adhered to human body tissue.
Note 1: Bend the tube in "V" form prior to starting suction, insert the suction
catheter into the location of existing phlegm on the patient when the
negative pressure reaches the desired range after start-up, then, recover
the tube to its original status. This will lead to quicker suction effect.
Note 2: The medical personnel shall select the proper suction catheter
according to the clinical requirement.
Note 3: The aspirator shall be operated under the medical personnel's
instructions strictly according to the scope of application and the operating
sequence listed in the instruction manual. Please contact the supplier or
manufacturer if there is any question.
Air filter
