Gimbal & Camera Installation
1th step
2th step
3th step
5th step
6th step
1.connect power cable
2.connect Gimbal control cable
to the Port
on the right-top as shown
Fix
camera
Tips
:
Fix baseboard
OSD parts Installation
Ensure that the camera in a horizontal position after
installation
otherwise
,
you may not be able to take smooth video.
1.connect monitor
2.install antenna
Gimbal control cable
power cable
Supporting pillar
Screws
baseboard
Gimbal control knob
monitor
3.connect power cable
4.connect AV output cable
5.8G Reciver
Power/Channel change botton
7-12V battery
Power button
1
horizontal plane
Fix camera through 3M Double Coated
Tapes .
Or
Fix camera through the Screw.
Screw
Screw
1th
Install Gimbal and camera as
the pictures shown
2th
Install
OSD
Parts as the
pictures shown
3th
Figure 2-1
Figure 2-1
Figure 2-2
Figure 2-2
Place seraphi on horizontal ground,power
on aircraft .
4th
Connect monitor and 5.8G
Receiver cables to battery(7-
12V) .
1
Please
select channel 8 to link
video through
channel change
botton
),that is OK
Tips:keep
gimbal
still,do not touch it.10
seconds later, the gimbal finished the
initialization.
5th
6th
Gimbal & Camera &OSD parts Installation
3.after installation ,put seraphi on
horizontal plane
Turn on monitor
Turn on 5.8G Receiver
(press the power button
for a long time)
Turn on camera
Power
on
RC transmitter
and
seraphi
Tips:keep
gimbal
still,do not touch it.10
seconds later, the gimbal finished the
i n i t i a l i z a t i o n . t h e n y o u
c a n
c o n t r o l
gimbal(pitch)through gimbal control
knob on transmitter.
HD camera
Antenna
5.8G transmitter
6.connect transmitter
7.Connect AV output
5.install antenna
4
