YUNEEC H920 PLUS, User Manual, Page: 27 / 39

＋
－
Connecting drone... H:N/A V.S:N/A H.S:N/A D:N/A
1 2 3 4 5
Del this POI
Relative altitude
Way Point focus this POI
10 m
POI XX
NO YES
1 2 3 4
5
6
7
STEP 1) Select any action below " Add Action ". The selected action will display in
blue.
STEP 2) Press "Add Action" in the blue frame, and the new added action will appear
in the Action column.
NOTICE: Slide the added action to the left to delete the action. Press and hold any
added action, and it can be moved to change its order of execution.
Hover
：
Choose “Hover,” and select “Add Action” to add a Hover action. When the
aircraft reaches the assigned waypoint, the aircraft will begin to hover/loiter. The
hover time may be manually set from 1s to 120s.
Pan 360°
：
Press “Pan 360°” and select “Add Action.” When the H920 PLUS arrives
at the selected waypoint, the camera will record while rotating 360° in the selected
pan direction.
NOTICE: When operating Pan 360°
，
regardless of the gimbal tilt mode, the gimbal
tilt angle will be the tilt custom value of the single waypoint.
Take Photo
：
Select “Take photo”, and then select “Add Action.” When the H920
PLUS reaches the selected waypoint, the camera will take a photo.
Record
：
Choose “Record,” and then select “Add Action.” When the aircraft reaches
the selected waypoint, the camera will begin to record video. The record time is
manually set within a range of 1s to 60s.
STEP 3) After all settings are completed, choose “YES.” Settings will be saved.
IMPORTANT NOTE: The system does not save any setting by default. Choose “OK”
to save settings. [<>] may be used to advance to set the last or next waypoint and
save the settings in proper order to set continuous flight actions.
Select DELETE button [ ] to simultaneously delete all waypoints. Individual
waypoints may be deleted by selecting the desired waypoint and choosing the
DELETE button. Only the chosen waypoint will be deleted. If there are no waypoints,
the delete button will not function.
26
POINT OF INTEREST (POI)
Multiple points of interest may be set prior to launching the H920 PLUS. The
gimbal/camera lens will point to the POI. If a waypoint is set to focus on different
POI, the previous setting will be applied to the POI. Press [ ] and then tap the
display screen to set the POI.
Tap the setting menu and the display will show as indicated below: Tap the delete
icon [ ] and the POI will be deleted.
Relative altitude: Set altitude of the POI.
1
2
3
4
5
6
7
ADDING WAYPOINT ACTIONS: