09-06-01
Page 13 of 13 op-instruct-leedz-ib.doc
CLEANING THE LOG SET AND FIREBOX.
During the annual inspection and maintenance appointment, the service person should clean dust, lint
and any light soot accumulation from the logs and the firebox area. An extra soft brush should be used
on the logs, as they are extremely fragile. If at any time the logs cannot be removed or installed
without force, the cause must be found. The logs must never be forced.
Procedure:
1. Remove front door as described previously
2. Remove the front log set from the firebox by lifting it up and out. Brush it gently over a newspaper
and carefully place it out of the way.
3. Remove the backlog and clean it in the same way.
4. The bark tray can be removed by lifting and pulling it straight out, with the bark still on it.
5. The bark consists of a mixture of vermiculite and composite chips and it can be dusted by sieving. If
needed a replacement bag can be ordered through your YUNCA dealer.
(See parts list for reference number)
6. With firebox empty a vacuum cleaner can be used to remove any visible dust and lint from within the
firebox area.
7. Replace logs in the reverse order of removal.
8. Replace the bark tray and redistribute the bark.
9. Replace and relatch the front door and close the side panels.
