09-06-01
Page 12 of 12 op-instruct-leedz-ib.doc
REMOVING THE GLASS FOR REPLACEMENT.
1. Remove the front door as described on previous page, and place front down on a soft
surface.
3. Remove the bottom glass retainer by taking out the four screws along the base of the door
4. To remove the front glasses place one hand under it and lift it up and out of the doorframe.
5. New glass with gasket attached can be ordered through your YUNCA LEEDZ agent.
Note:
Only the genuine Yunca glass may be fitted.
6. Place replacement glass in position in the reverse order of removal.
7. Replace bottom glass retainer with screws.
REPLACING THE GASKET.
The YUNCA LEEDZ has a 10mm fibreglass gasket surrounding the front door. Should it ever need
replacement, use only the replacement gasket that is available from your YUNCA dealer. The
reference number for this is listed in the parts list.
Procedure.
1. Remove the front door as described above.
2. Remove the existing gasket and clean its channel with a brush.
3. Lay a thin bed of gasket cement around the length of the channel.
4. Lay the gasket in the channel with the join half way along the bottom.
5. Replace the door carefully to avoid dislodging the gasket.
CLEANING THE GLASS
The glass may be cleaned with ordinary household glass cleaner and a soft cloth or paper towel.
Note: Never clean the glass when it is hot. Do not use abrasive cleaners on the Glass.
