Yuchai YC310LC-8, Operation Manual

Page: 34 / 184

7) Please walk on the grass, leaves or wet steel in a low speed; because even the slope is mall, the
machine also has the danger of slipping.
8) Do not turn sharply when going downhill or uphill, otherwise the machine will overturn.
9) When parking the machine on the slope, the front blade must be inserted into the soil, and the
bucket must be put down to insert into the oil. After it is stable, you can stop the engine and the
driver can get off the machine.
5) Do not turn on slopes or cross the slope.
Before go uphill, you should first go
downhill to a flat place to change the
position of the machine.
6) When working on the slope, it must start in
the higher place, and gradually dig in the
downhill direction, with the blade in the
back, and the dumping position is in the
uphill direction.
Dangerous
It is very dangerous to stop the machine on
the slope! If it is inevitable, you must be in
accordance with the following: if the engine
stalls on the slope, please immediately lower
the blade and bucket to the ground, put all the
handles in place, and then restart the engine.
Even a short stop on the slope, you should
also lower the blade to the ground, put all the
handles in place, at the same time, place
enough fixed obstacles at the bottom of the
tracks.
2-18