Yuchai YC310LC-8, Operation Manual

Page: 33 / 184

4) When the machine is walking or in operation, it must keep a safe distance with people, buildings
and other machines to prevent access to them.
5) When walking through the limited high places such as the underground tunnels, under bridges or
wires, make sure that there is someone to command with gesture, and keep a safe distance with
the commander.
6) When going downhill or uphill, the platform must be locked.
7) When going though the bridge, building or supports, you should first confirm whether they are
sufficient to support the weight of the machine.
8) Before walking on the road, you should first consult the local traffic management department to get
permission.
3. Walking or working on slopes
It is very dangerous for excavators to walk or work on the slopes. You must be careful enough.
1) It is recommended not to go downhill or uphill
on the longer slop whose angle is more than
20°.
2) When the machine is working, especially
going downhill or uphill, please keep your
belt tied tightly.
3) When the excavator is going uphill, keep the
driving wheel in the below, lift the blade and
make the moving boom, stick fully extended
and parallel to the slope, with a distance of
20-30cm between the bucket teeth and the
ground, and have the platform locked, then
the machine can go uphill with a low speed.
4) When the excavator is going downhill, keep
the driving wheel in the above, lift the blade
and make the moving boom, stick fully
extended and parallel to the slope, with a
distance of 20-30cm between the bucket
teeth and the ground, and have the platform
locked, then the machine can go downhill
with a low speed.
2-17