NOTES:
NOTES:
NOTES:
NOTES:
•
First insert the batteries of main unit, then insert the batteries of the outdoor sensor within 3
minutes after the main unit is powered on, to assure that the sensor data is received well.
In case of the outdoor sensor data is not received, please press
␇
␇
␇
␇
key for more than 3
seconds to synchronize the sensors signal again.
•
Every time the batteries are replaced in the main unit, it will loose all the weather data.
•
Every time the batteries are replaced in the sensor unit, it will synchronize with the main unit
only if you press the
␇
␇
␇
␇
key for more than 3 seconds.
•
•••
Mounting
Mounting
Mounting
Mounting the
the
the
the main
main
main
main unit
unit
unit
unit
The main unit can be placed onto any flat surface or wall mounted at the desired location by
the hanging hole at the rear side. We strongly suggest, checking that the radio signals (from
the sensors and from the DCF77 time signal) can be received before mounting.
•
•••
Mounting
Mounting
Mounting
Mounting the
the
the
the outdoor
outdoor
outdoor
outdoor sensor
sensor
sensor
sensor onto
onto
onto
onto the
the
the
the stainless
stainless
stainless
stainless steel
steel
steel
steel mast
mast
mast
mast
For accurate results, the outdoor sensor mast should be securely mounted onto a horizontal
surface and in an open area away from trees and other coverings where rainfall or wind
speed may be reduced causing inaccurate reading.
1.
Mounting
Mounting
Mounting
Mounting the
the
the
the wind
wind
wind
wind speed
speed
speed
speed sensor
sensor
sensor
sensor to
to
to
to the
the
the
the first
first
first
first plastic
plastic
plastic
plastic bracket
bracket
bracket
bracket
：
first check the wind-fan
can rotate freely before fixing. The wind speed sensor should now be mounted onto the
bracket provided to allow the wind to travel around the sensor unhindered from all
directions. Please follow the below display :
2.
Mounting
Mounting
Mounting
Mounting the
the
the
the wind
wind
wind
wind direction
direction
direction
direction sensor
sensor
sensor
sensor to
to
to
to the
the
the
the first
first
first
first plastic
plastic
plastic
plastic bracket
bracket
bracket
bracket
: first check the wind
direction sensor before fixing. There is one cable from wind speed sensor, insert it into
the socket under the wind direction sensor. Please follow the below display:
