Outdoor sensor:
•
Frequency: 433 MHz
•
Transmission range: 100 meters in open area.
Note: Actual distance may vary depending on the environment, it will be shortened in real
buildings due to electrical interference, concrete walls etc.
•
Batteries: 2 x AA, LR6 1.5V (not included)
Installation
Installation
Installation
Installation
•
•••
Installing
Installing
Installing
Installing the
the
the
the Batteries
Batteries
Batteries
Batteries
•
Open the main unit battery cover located at the back of the main unit and insert 3 pcs AA
batteries into the battery compartment and close the battery cover.
•
Pull away the radiation shield from the thermo-hygro sensor to reveal the 2 sockets (the
sockets for the wind sensor and rain sensor)
•
1. Connect the wind speed sensor cable into the socket at the bottom of the of the wind
direction sensor
2. Connect the cable from wind direction and the cable from rain sensor to the
corresponding sockets of the thermo-hygro sensor by clicking them into place.
Make sure that rain and wind cables are connected to the correct sockets.
3. Open the battery cover and insert 2 pcs AA batteries into the battery compartment and
close the battery cover.
