y t
0 7
EN
0 6
y t
MOUNTING THE BATTERY
BATTERY COVER SET
Mount the other bracket (C) on the side
of the battery where the charging socket
is located. Use the four included bolts
(D) and tighten them with 2.5 – 3 nm
of torque.
Mount the bracket (A) on the side of the
battery without the charging socket. Use
the four included bolts (B) and tighten
them with 2.5 – 3 nm of torque.
Slide the cover onto the battery and place
two spacers (E) as per the illustration.
Tip:
Maybe you only require one or even
no spacers. Try each configuration to find
the best fit for the cover in your frame!
Place both bolts (B) and tighten them
with 0.5 nm of torque – all done! You can
now mount the battery in your frame. For
instructions on how to do so, refer to the
assembly manual of your E-MTB.
1.2
1.1
1.3
1.4
x1
x6
(B)
x1
(A)
(C)
x1
(D)
x4
(E)
x2
x1
Caution:
Do not damage the rubber seal
of the charging socket!
