IDS WA System
General information
ba76199e03
08/2018
5
1
General information
The IDS WA System is an accessory for IDS measuring systems enabling a wire-
less connection between any IDS sensor with plug head connector (variant W) and
your IDS meter.
Two adapters, one at the IDS meter (IDS WA-M) and one at the sensor (IDS WA-
S), replace the sensor cable with an energy-saving Bluetooth LE radio connection.
The sensor is supplied with power by a rechargeable battery in the IDS WA-S
adapter. The battery is charged with the charging device included in the IDS WA
System (IDS WA-S Charger).
To upgrade the IDS WA System, equip further IDS sensors with the IDS WA-S
adapter, which is available as an accessory.
1
IDS WA-M adapter (on the meter)
With an IDS WA-M adapter connected, the IDS meter registers up to 6
wireless sensors within a radius of up to 10 meters. The administering of
the sensors is done in the
Sensors
menu.
2
Wireless sensor
Unit of IDS WA-S adapter (3) and IDS sensor (4)
3
IDS WA-S adapter (connected to the sensor)
4
IDS sensor with plug head connector (variant W)
5
Sensors registered and selected for the measured value display (max. 3,
corresponding to the number of sensor connections / channels on the
meter).
6
Sensors registered but not selected for the measured value display.
2
1
3
6
1
5
6
2
3
4
