IDS WA System
Commissioning
ba76199e03
08/2018
15
3.8 Mounting an IDS WA-S Charger module to a wall
To store the IDS WA-S Charger and IDS WA-S adapter in a way that saves space
and keeps them always ready for use, the IDS WA-S Charger is prepared to be
The number of IDS WA-S Charger modules is limited by the strength of
current available at the USB connection.
Each IDS WA-S Charger module requires a charging current of max. 180
mA.
Example: To be able to use 5 IDS WA-S Charger modules at one USB
connection, the USB connection must provide a current of at least 900 mA
(= 5 x 180 mA).
2. Bolt together up to 5 connection rods (corresponding to the number of IDS WA-
S Charger modules).
3. Tighten the cap nut with washer on the end of the connection rod with external
thread.
4. Plug the combined connection rod through the channel (2) up to the stop (at
the cap nut).
5. Tighten a bolt (M3x6) with washer onto the end with the open inside thread of
the connection rod.
Tighten the bolt until the combined IDS WA-S Charger modules form a perma-
nent unit.
6. Always operate the combined IDS WA-S Charger modules connected to a
power pack with USB connection.
7. Connect the power pack with USB connection to the socket (1).
1
2
5
