Storing the IDS WA-S adapter
IDS WA System
18
ba76199e03
08/2018
4.3 Status LEDs of the IDS WA-S adapter
The IDS WA-S adapter on the sensor indicates its operating condition with colored
LEDs.
5
Storing the IDS WA-S adapter
For storing, put the IDS WA-S adapter with the sensor connected into a IDS WA-S
Charger ready for operation.
The battery of the IDS WA-S adapter is automatically recharged when the charge
becomes less. Thus the wireless sensor is ready for operation at any time.
The IDS WA-S Charger ready for operation can also be used for storing the
wireless sensor for longer periods of time.
This indicating can be switched off in the
Sensors
menu.
Color Status
Meaning
GREEN Flashes Data are exchanged between the sensor and meter.
The LED flashes during each data exchange.
You can switch off the flashing by selecting the connection
status
in the
Sensors
menu.
RED
Flashes
once
The sensor is identified.
The function is started for the selected sensor in the
Sensors
menu with
<ENTER>
.
BLUE
Flashes
once
The measured value was stored in the meter with the function
key of the IDS WA-S adapter and transferred to an interface.
BLUE
Flashes A measurement with AutoRead was started with the function
key of the IDS WA-S adapter.
Off
-
No data exchange, no connection
To store the wireless sensor outside the charging station for longer
periods of time, we recommend you store the IDS WA-S adapter and
sensor separately.
