YSI 85, Operation Manual

Page: 26 / 60

Saving Data Section 8
YSI, Incorporated Model 85 22
6. When you have finished recalling data, press the MODE button to return to normal operation.
NOTE: The Model 85 will recall data as a list. When the UP ARROW is depressed the Model 85
will display the Site ID# for the previously recorded date. For example: If you are reviewing Site
ID# 5 and the
UP ARROW is depressed the Model 85 will display Site ID# 4. If you are reviewing
Site ID# 5 and Site ID# 5 was the last set of data stored the DOWN ARROW button will display
Site ID# 1.
Here is an example of the Model 85 memory.
Site ID #1
Site ID #2
Site ID #3 If the
UP ARROW button was pressed the Model 85 would display Site ID #2
Site ID #4
Site ID #5
8.3 ERASING STORED DATA
1. To erase the data that is stored into the Model 85’s memory, depress the MODE button repeatedly
until the Model 85 displays ErAS on the screen. (see figure #2)
2. Depress and hold the
DOWN ARROW and
ENTER buttons simultaneously for approximately 5
seconds.
3. The Model 85 flashing DONE on the display for 1
to 2 seconds indicates successful erasure. The
instrument will automatically change to normal
operation after completion.
IMPORTANT:
Data in all 50 site ID’s will be
erased completely and will be lost forever. Do not
use the erase function until all recorded data has been
transcribed to an archive outside the Model 85.
ErAS
figure #2