YOYOCam G3 User Guide v0.2
Page 30
Motion Detection Parameters
To set Motion Detection Sensitivity
You can adjust the sensitivity for motion detection on a scale from 1 (least sensitive) to 5 (most
sensitive. The default is 4.
Command:
#36#Sensitivity#
Example:
#36#3#
Response:
Motion detection sensitivity has been set to 3
To set number of motion detections required to generate an alarm:
Command:
#141#Detections#Minutes#
The default is one detection per minute (#141#1#1#)
Built-in Temperature Sensor
YOYOCam G3 includes a built-in temperature sensor. You can set a temperature range and get a
warning by SMS if the observed temperature goes outside that range.
Turn On:
#15#1#
Response:
Temperature alert - enabled
Turn Off:
#15#0#
(Default)
Response:
Temperature alert – disabled
To set temperature range:
Command:
#16#LoTemp#HiTemp#
Example:
#16#5#35#
NOTE: Default LoTemp is 20; default HiTemp is 30. Temperatures are in degrees Centigrade.
Wireless Sensors
Please see
Wireless Sensors.
