YOYOMOTION YOYOCam G3 User Manual Download Page 12

Page: 12 / 61

YOYOCam G3 User Guide v0.2

Page 12

Getting started

STEP 1. Prepare YOYOCam G3

An antenna is included and ready-mounted at delivery. To remove it, gently unscrew the nut

by hand. To attach it again or use a different antenna, align the plug with the antenna

connector and screw it on gently by hand until it is finger tight. Do not use tools.

Press on the patterned area of the battery compartment cover and slide it downwards.

Lift the battery cover away from the device.

Move the battery out of the way as shown.

•

WARNING:

Always be sure to switch off YOYOCam and disconnect the power

before inserting or removing the SIM card. Do not touch the gold contacts of the SIM

Card.

•

NOTE:

The SIM PIN must be disabled. Use an ordinary mobile phone to check and,

if necessary, turn off SIM Lock.

•

NOTE:

Check that the SIM card has credit and is enabled for MMS.

•

NOTE:

Do not insert the SIM too far because it could slide through the back of the

holder and inside YOYOCam

Summary of Contents for YOYOCam G3






























































Search results

Summary of Contents for YOYOCam G3

Reviews:

Related manuals for YOYOCam G3

Brands by name

Popular brands

YOYOMOTION YOYOCam G3, User Manual

Search results

Summary of Contents for YOYOCam G3

Reviews:

Related manuals for YOYOCam G3

Brands by name

Popular brands