OPERATING & MAINTENANCE MANUAL MODEL : EHA series
YOUYANG AIRPORT LIGHTING EQUIPMENT INC. Page
35/55
4.3.2 Changing Reflector
No.
Photo
Description
1
-. A photo of fully assembled
2
-. Loosen 4 screws by using a cross-type screw
driver to release front lens.
1. Fixture 2. Front Ring 3. Rubber Packing,
4. Front Lens
5. Screws (M4*15)
3
-. Loosen reflector screws by using a cross-type
screw driver.
Assembling procedures shall be backward.
1. Fixture 2. Reflector
3. Screws (M3*8)
(Caution)
1.
O-ring and Packing shall not be reused. Should these have to be used, confirm if
any damage is present.
2.
Wear soft gloves and do not touch the surface of lamp by naked hand when
replacing lamp or globe.
3.
Applying anti-seize compound to stainless steel screw is recommended