OPERATING & MAINTENANCE MANUAL MODEL : EHA series
YOUYANG AIRPORT LIGHTING EQUIPMENT INC. Page
34/55
4.3 REPLACEMENT PROCEDURE
4.3.1 Front Lens Replacement
No.
Photo
Description
1
-. A photo of fully assembled
2
-. Loosen 4 screws by using a cross-type screw
driver. Replace faulty front lens with new one.
1. Fixture 2. Front Ring 3. Rubber Packing,
4. Front Lens
5. Screws (M4*15)
(Caution)
1.
O-ring and Packing shall not be reused. Should these have to be used, confirm if
any damage is present.
2.
Wear soft gloves and do not touch the surface of lamp by naked hand when
replacing lamp or globe.
3.
Applying anti-seize compound to stainless steel screw is recommended
