Before entering the setup, you must select the remote channel, different channels
can set different temperature alarm range
Temperature and frost alert:
Press “ ” button to activate or deactivate the remote temperature alert,
When the
remote temperature alarm is activated, the temperature alarm icon is displayed in the
remote sensor bar
When the remote channel temperature value exceeds the set temperature range, will
activate the alarm, the weather station will every minute continuous alarm 5 times, at
the same time, temperature alarm in alarm icon "
" flashes, If the alarm activates
the temperature that is currently displayed on the channel, its temperature value and
alarm upper limit icon “
"or lower limit icon"
"
also flashes
When the temperature of REMOTE SENSOR is –1°C to + 3°C or +30°F to + 37°F, the
frost alarm will be activated,
symbol " " flashing.
F.Y.I.:
When the temperature is higher than the upper limit of the alarm temperature
setting, the activation of the upper limit alarm, symbol "
" flashing,
When the temperature is lower than the lower limit of the alarm temperature, the
lower limit alarm is activated, and the symbol "
" flashes
Low battery:
If the battery symbol “
” appears the batteries in the remote sensor should be
replaced as soon as possible.
The weather forecast:
The weather station calculates a weather forecast for about the next 12 hours based
on the barometric pressure trend. Of course this forecast can‘t compare to that of
professional weather services supported by satellites and high performance computers,
but merely provides an approximate indication of current developments. Please take
the weather forecast from your local weather forecasting service into account as well
as the forecast from your weather station. If there are discrepancies between the
information from your device and from the local weather forecasting service, please
take the advice of the latter as authoritative.
Press and hold the “
” button for 2 seconds to enter the air pressure unit and
