Page 14
Most of the original programming
( Factory Setting )
from the factory can be
changed to alternative programming
( Option Setting )
by Programming Switch
(hereinafter called PS ).
Programming Button
LED
LED flashes when locked or the passive
starter-kill is activated.
Turn the key to On position. (Engine Off)
Press PS (Programming Switch) for two seconds until Parking Light
flashes once for
Option #1-1 to #1-11
, then release the switch.
Or, press PS for four seconds until Parking Light flashes twice for
Option #2-1 to 2-10,
then release the switch.
Option Programming with Programming Button for AM Units
Page 15
If you want to change more options, go to Step 3. However, if you
want to change options from
Option#1-1 to #1-11
to
Option#2-1 to
#2-10
or vice versa,
1) wait for 4 seconds until Parking Light flash once for 1 second to reset.
Then go to the Step , or
2) turn the key off and go to the Step .
Within 4 seconds after you released the switch, press and release
PS for the number of times of the option number you want to change.
Within 2 seconds, the LED and Parking Lights will flash the same
number of times as you pressed the switch at step 3.
If the number of flash does not correspond to what you did at Step ,
1) wait for 4 seconds until Parking Light flash once for 1 second to
reset. If this happens, go to Step , or
2) turn the key off and go to the Step .
Within 4 seconds from step 4, press PS once for factory setting, the LED
....................
and Parking Lights will flash once to confirm. Press PS twice for optional
....................
setting, the LED and Parking Lights will flash twice to confirm.
If you want to reset any changes you made to the Factory Setting,
Turn the key to On position. (Engine Off)
Press PS (Programming Switch) for two seconds until Parking Light
flashes once for
Option#1-1 to #1-11
, then release the switch.
Or, press PS for four seconds until Parking Light flashes twice for
Option#2-1 to #2-10
, then release the switch.
Within 4 seconds after you released the switch, press and release
PS for 3 seconds.
Within 2 seconds, the LED and Parking Lights will flash three times
to confirm the above step.
If any of the above steps is not followed correctly, the Parking Lights will
flash once for 1 second to reset.
If that happens, please start from Step 2.
Installation of AM Antennas
The antennas have been calibrated for
horizontal installation at the left-top corner
of the windshield. Different installation
may adversely affect the transmitting
distance.
CANADIAN MODELS ONLY. THE US MODELS DO NOT HAVE THE BUTTON.
