Page 19
Page 18
Feature
Cold Start with Temp Sensor
N/A
N/A
Ignition Controlled Door Lock
N/A
N/A
N/A
N/A
N/A
Factory Default
OFF
3 Hr
OFF
Optional
ON
1.5Hr
ON
Timer Start or Minimum
Interval between Cold Starts
Cold start mode requires installation of the optional temperature sensor.
In the default factory setting, Cold Sensor input works as
Remote StartActivation Input. A Ground pulse to this wire will start the vehicle
This programmable option enables your vehicle to automatically lock the
doors when the brake pedal is pressed after starting the vehicle with a key.
In addition, the vehicle will automatically unlock the doors upon pulling the
key out from the ignition.
However, if the emergency brake wire was installed, the vehicle will unlock
upon the emergency brake is set if the engine is still running with the key.
The option must be chosen at the time of installation.
Error Number
(# of times parking lights flash)
Error Reason
1
2
3
4
5
6
7
Engine On
Key On
Door Open
Trunk Open
Brake On
Hood Open
Reservation Off
(Manual Transmission Only)
If there is a problem in auto-starting your car, you will see three flashes of the
parking lights when you attempt to auto-start the car. Wait for 2 seconds and the
cause for the error, will be indicated by the number of times the parking lights flash.
Diagnosing Problems with Auto-Start
