aquaMAX
TM
-Basic 360 Series
3-7. Service Operation
On
「
Standby
」
mode, pressing
Service
key, the menu for cleaning filters and tubing is displayed. On this, push
Select
key, then it performs
「
Service Operation
」
and Operate LED is lightened on. After Service Operation is
finished or you press the
Operate/Standby
key, it turns to the
「
Standby
」
mode.
<Pressing
SERVICE
key > <Select by pressing
Measure
key> < Pressing
Select
key>
¢SERVICE¢
Select RO/ION
¢SERVICE¢
Product : RO
¢SERVICE¢
RO Selected
¢SERVICE¢
FLUSH
¢SERVICE¢
WASH END
¢SERVICE¢
PRESSURE DOWN
¢SERVICE¢
Wait ........OK!
¢SERVICE¢
CHANGE FILTER
¢SERVICE¢
CHANGE START
- Select RO/ION
Selection for the type of product water is available. This menu is shown in aquaMAX-Basic 361/363 type only.
The type of product water can be changed by
Measure
button and selected by
Select
button.
- Flush
On the first operation or flushing filters, this function is required and it drains off wastewater for 5 min.
Pressing
Operate/Standby
key once more makes the system stop and get back to
「
Standby
」
mode.
- Pressure Down
It’s used to reduce inlet pressure when any parts of filters need to be replaced.
- Change Filter
The system shows
「
Change Filter
」
message if the filter life is finalized. And it reduces inlet pressure to
replace filter. At this point, filter life is reset.
24
