aquaMAX
TM
-Basic 360 Series
2-7. How to Connect Feed Water Kit
1. Purpose of Installation
On installation of water purification system, there are some difference at water pressure depending of location,
time and area. So, a decompression valve is built in the unit to prevent housing damage, pump error and fitting
separation. When you install water purification system, you must connect a tap water connector.
2. Details
1) Connection of tap water connector
a. Insert a bushing (1-1) of tap water connector(1) into a tap, and
then tighten a screw(+).
b. Turn a nipple (1-2) counterclockwise up to bushing completely.
-There is a rubber-ring to protect from leakage and helps installation.
3. Caution
The use with a booster pump is required when the water pressure of installation area is lower than
0.5kg/
㎠
~ 1kg/
㎠
to meat the product flow rate on the specification.
16
