“A” if the paddle is connected or the letter “M” if the straight key is
connected. (If not connected any key, will heart he letter “A”).
V/M/SAV Button
Click this button will be Alternating between Memory
mode(MEM)and VFO mode, the LCD screen will show the MEM-** or
VFO-**(**The figures for 01-30).In Memory Mode the Tuning knob is
used to change memory locations. In VFO Mode the Tuning knob is
used to change the frequency.
Press the V/M/SAV button for 2 seconds(the LCD screen will
display SAVE), the current frequency and current mode will be
stored in the Memory Location selected.
RIT/MOD button
Click this button to enter or exit RIT function. RIT 0.00 showing,
the step is 10Hz in adjustment mode
When in the RIT mode, turning the tuning knob clockwise raises
the frequency (as indicated by the up arrow). turning the tuning knob
counter-clockwise will lower the frequency (as indicated by the down
arrow).
To Change mode, press and hold the RIT/MOD for 2 seconds.
This will allow you to change the mode from CW to USB to LSB and
CW again. Press and hold the RIT/MOD for 2 seconds for each
change.
Summary of Contents for HB-1B MK3
Page 8: ...Youkits 2018 3...
