Transmitting
You can transmit in 5 mentioned band. The screen display “TX” when
transmitting. S meter indicate the power output, screen showing
forward power output and R for resistant power, you want to see less
R as possible. Showing HI! Means your SWR is too high to operate.
The indicator closed to antenna showing light up means in
transmitting. The screen display “TX ERRER” when you try to transmit
outside 5 Ham band.
Automatic key function
Automatic call CQ
Press the CQ/SET button lightly to send “CQ CQ CQ DE
(yourcall sign three times) + K”. If the CQ is to be cancelled
press CQ/SET button for 1 second at any time during the CQ.
Below 3 function must use paddle to operate
Change speed
Press CQ/SET button for approximately 2 seconds and the Morse
code letter “S” will be heard, then release the button. With in 8
seconds, push the paddle to the DOT side to increase the keyer
speed or to the DASH side to decrease the keyer speed. When
complete, press CQ/SET lightly to exit (the letter “E” will be heard).
How to enter your call sign
Press CQ/SET button and hold about two seconds ,you can hear
the Morse code letter “S”, continue to hold down the CQ/SET button
until you hear the letter “I”, at this time release CQ/SET button, and
then send your call sign with paddle as usual. When done, a short
click CQ/SET button to exit, you can hear Morse code letter “E”, or
wait for about 8seconds, it will automatically exit.
Summary of Contents for HB-1B MK3
Page 8: ...Youkits 2018 3...
