60
10 Electromechanical safety standards
The system complies with the EMC test standard IEC60601-1-2: 2007+AC:2010.
Medical Electrical Equipment. General Requirements for Basic Safety and Essential
Performance-Collateral Standard. Electromagnetic Compatibility.
Requirements and Tests.
WARN
ING
：
1、The use of inappropriate accessories will reduce the performance
of the product.
2 、 The selected adapter should meet the requirements of the
IEC60601-1-2: 2007 AC:2010
3
、The equipment or system may be interfered with by other equipment
even if it meets the emission requirements of the corresponding
national standards.
Cable information table
Order
number
Name
Cable length
（
m
）
Whether to
shield or not
Remarks
1
DC input power cord
1.5
yes
/
2
C5-2Fs Probe cable
1.5
yes
/
3
C5-2Ks Probe cable
1.5
yes
/
4
L11-4Ks Probe cable
1.5
yes
/
5
L11-4Gs Probe cable
1.5
yes
/
6
C8-5Ks Probe cable
1.5
yes
/
注意：
1.
The use of specified accessories, transducers, and cables may cause the
system to be launched with increased or decreased immunity
2.
This system can not be close to or in contact with other equipment, if it is
necessary, it must ensure the normal operation of the system in use.
3.
This system requires special protection against EMC, and the need for the
installation and maintenance of EMC provided in the information
environment to meet the following.
4.
This system is lower than the minimum prescribed amplitude products or
minimum operating conditions will lead to incorrect results in
physiological signals of patients.