49
.
sterilization solution, please contact the manufacturer for product
information.
Cleaning
Please follow the instructions on the manual:
A) Wear antibacterial gloves to prevent infection.
B) Clean the probe with clean water or soapy water to remove the attached stains. Polyurethane
sponge can be used for cleaning. Avoid using a brush in order not to damage the probe.
C) After cleaning the probe, wipe off the moisture on the surface of the probe with sterile cloth
or gauze. Do not dry the probe by heating.
General disinfection
Gently wipe the probe back and forth with a medical cotton ball dipped in 75% medical grade
alcohol.
Note on disinfectant solution:As for methods of dilution, concentration and disinfection,
please refer to the instructions on concentration of disinfectant solution and disinfection
methods, provided by the manufacturer;
After cleaning, wipe the probe with sterilizing cloth or gauze, then let the alcohol evaporate
naturally on the probe surface. Do not dry the probe.
As mentioned above, market popular medical grade disinfection and cleaning products:
Solutions
Origin
Active Ingredients
Tristel Duo ULT
UK
Chlorine dioxide
Tristel Duo NCU
UK
Chlorine dioxide
Tristel trio wipes system
UK
Enzymes, Chlorine Dioxide
Accel® PREVention™ Wipes & RTU
CA
Hydrogen Peroxide
CaviWipes
US
isopropyl alcohol
Sani-Cloth HB Germicidal Disposable
Wipe
US
Alcohol free quaternary ammonium
Sani-Cloth Plus Germicidal Disposable
Cloth
US
isopropyl alcohol
Cautio
n
：
1
.
The probe must be cleaned after each use;
2
.
Do not use surgical brush to clean the probe. Even soft brush may damage
the probe. Only soft cloth is allowed;