Cleaning
Key functions
Express
Massage
Cycle Setting
Vacuum
Indicator
Vacuum
Setting
Timer
Manual
On / Off
Lock Function
Deep Express
Cycle Indicator
Increase
Vacuum / Cycle
Manual Mode
“On” Indicator
Reduce
Vacuum / Cycle
Mode
Battery Indicator
Battery indicator
Battery is completely charged
Battery is half full
Battery is low, charge the motor unit as soon as possible
Battery is flat, charge the motor unit before use
Note:
Avoid leaving on charge for longer than 24-hours as this may
damage the unit permanently.
9
Parts of the pump that do not come in contact with breastmilk do not
require cleaning on each use. Clean these parts prior to the first use
per instructions below and again whenever you see necessary. All
other parts, which do come in contact with breastmilk, are cleaned
and sanitised per instructions on page 11.
Parts that do not come in contact with breastmilk are:
• Motor unit
• Charger
• Tubing
• Tubing connector
• Membrane cap
Instructions:
When necessary, wipe the motor unit with a soft, damp
cloth while the unit is off and locked. Do not submerge the motor unit
or charger in water or sanitiser.
When cleaning the Y-shape tubing and membrane cap, they can be
cleaned following the steps on page 11. Ensure tubing is completely
dry before use.
10
