Warranty and contact details
Troubleshooting
19
20
Issue
Solution
Condensation
in tubing
If condensation occurs, ensure that tubing dries
completely after each use. To do this, disconnect
the tubing from the membrane cap and turn the
pump back on to dry the tubing while you are
packing up the breastmilk.
Ensure the tubing, membrane and membrane
cap are dry before use.
Milk in tubing
Check the membrane for damage. Replace the
membrane if needed and clean and sanitise or
replace the tubing.
Low or no
suction
Nipple pain
Seek advice from a Lactation Consultant.
Ensure you have the correct fit breast shield.
A good fit will ensure a good level of suction.
You may wish to speak to a Lactation Consultant
to assist in finding the most appropriate size
for you.
If using as a single pump with y-shape tubing,
check that the other side of the tubing is firmly
connected into the top of the y-shape tubing
connector.
Check that all parts are securely assembled.
Check the valves for any damage or wear.
Replace the valve if needed.
The ONE Double Electric Breast Pump has a 12-month warranty from
time of purchase on product faults. Please contact your local Youha
distributor for further warranty information or if you wish to order
replacement parts.
Hong Kong & Macau Sole Distributor
Power Grand I&E Ltd
Flat E, 22/F, Block 3, Golden Dragon Industrial Centre,
172-180 Tai Lin Pai Road
Kwai Chung, N.T.
Hong Kong
Tel: +852 3188 1030
www.youha.com.hk
Australia & New Zealand Sole Distributor
Youha Australia
PO Box 1109
St Leonards, VIC 3223
Australia
Tel: +61 423 111 573
www.youha.com.au
Proudly Made in China
Manufactured by:
Ningbo Youhe Electrical
Appliance Technology Co., LTD
