20
9.7 Parts replacement procedure
Part name
Disassembly
(See 9.5.)
Reassembly
(See 9.6.)
Cover gasket
Procedure 1
Procedures 6 to 7
Float (P) assembly
Procedures 1 to 2
Procedures 4 to 7
Cock assembly
Procedures 1 to 4
Procedures 1 to 8
Screen
Procedure 1
Procedures 5 to 7
[Procedure 8]
With applying spanner to the cock (width across flat: 9 mm), adjust the
direction of the name plate. After adjustment, tighten the nut with torque
wrench (width across flat: 22 mm) with torque of 35 N
・
m.
* If the name plate is not in correct direction, the product does not work
properly. See “No.4, 7.2 Precaution for installation” on Page 8 for the
adjustment procedure.
Torque wrench
(width across flat: 22 mm)