background image

3

YORK partecipa al Programma di Certificazione EUROVENT. I prodotti interessati figurano nella Guida EUROVENT dei Prodotti Certificati.
YORK is partecipating in the EUROVENT Certification Program. Products are as listed in the EUROVENT Directory of Certified Products.
YORK ist am Zertifikations-programm EUROVENT beteiligt. Die entsprechend gekennzeichneten Produkte sind im EUROVENT - Jahrbuch aufgefürt.
YORK partecipe au Programme de Certification EUROVENT. Les produits figurent dans l’Annuaire EUROVENT des Produits Certifiés.

Dichiarazone di conformità

Declaration of conformity

Konformitätserklärung

Declaration de conformite

IT

EN

DE

FR

IT 

Noi, JOHNSON CONTROLS, dichiariamo 

sotto la nostra esclusiva responsabilità. che tutti 
i ventilconvettori descritti in questo manuale 
sono conformi a quanto prescritto dalle seguenti 
Direttive:
•  Direttiva bassa tensione 2014/35/UE
•  Direttiva compatibilità elettromagnetica 2014/30/UE
•  Direttiva sostanze pericolose 2011/65/UE
•  Direttiva progettazione ecocompatibile 2009/125/CE
•  Direttiva (RAEE) 2012/19/UE
•  Regolamento 2016/2281/UE 
e che sono state applicate tutte le norme e/o 
specifiche tecniche di seguito elencate:
•  EN 55014-1:2006 + A1:2009 + A2:2011
•  EN 61000-3-2:2014
•  EN 61000-3-3:2013
•  EN 55014-2:2015
•  IEC EN 60335-1:2013-05 + A11:2015
•  IEC EN 60335-2-40:2005 + A1:2007 + A13:2012
•  UNI EN 1397:2016

EN 

We, JOHNSON CONTROLS, hereby declare 

under our own responsibility that all fan coil units 
described in this manual comply with provisions of 
the following Standards:
•  Low voltage Directive 2014/35/EU
•  Electromagnetic compatibility Directive 2014/30/EU
•  Hazardous substances Directive 2011/65/EU
•  Ecodesign Directive 2009/125/EC
•  Directive 2012/19/EU (WEEE)
•  Regulation 2016/2281/EU
and that all the following harmonized standards 
have been applied: 
•  EN 55014-1:2006 + A1:2009 + A2:2011
•  EN 61000-3-2:2014
•  EN 61000-3-3:2013
•  EN 55014-2:2015
•  IEC EN 60335-1:2013-05 + A11:2015
•  IEC EN 60335-2-40:2005 + A1:2007 + A13:2012
•  UNI EN 1397:2016

DE 

Wir, JOHNSON CONTROLS, erklären aus-

schließlich unter unserer eigenen Verantwortung, 
daß alle Ventilatorkonvektoren, in diesem Hand-
buch beschrieben, den folgenden Richtlinie ent-
sprechen: 
•  Niederspannung - Richtlinie 2014/35/EU
•  Funkentstörung - Richtlinie 2014/30/EU 
•  Gefährlicher Stoffe Richtlinie 2011/65/EU
•  "Ökodesign" Richtlinie 2009/125/EG
•  Elektro- und Elektronik-Altgeräte Richtlinie 2012/19/EU
•  Verordnung 2016/2281/EU 
und daß alle folgende Norme angewendet 
werden: 
•  EN 55014-1:2006 + A1:2009 + A2:2011
•  EN 61000-3-2:2014
•  EN 61000-3-3:2013
•  EN 55014-2:2015
•  IEC EN 60335-1:2013-05 + A11:2015
•  IEC EN 60335-2-40:2005 + A1:2007 + A13:2012
•  UNI EN 1397:2016

FR 

Nous, JOHNSON CONTROLS, certifions sous 

notre propre responsabilité, que tous les ventilo-
convecteurs mentionnés sur ce manuel sont 
conformes aux suivantes Directives: 
•  Directive basse tension 2014/35/UE
•  Directive compatibilité électromagnétique 2014/30/UE 
•  Directive substances dangereuses 2011/65/UE 
•  Directive éco conception 2009/125/CE
•  Directive (DEEE) 2012/19/UE
•  Règlement 2016/2281/UE 
Et qu’on a appliqué toutes les règles et/ou 
spécifications techniques de suite indiquées:
•  EN 55014-1:2006 + A1:2009 + A2:2011
•  EN 61000-3-2:2014
•  EN 61000-3-3:2013
•  EN 55014-2:2015
•  IEC EN 60335-1:2013-05 + A11:2015
•  IEC EN 60335-2-40:2005 + A1:2007 + A13:2012
•  UNI EN 1397:2016

Basildon, 05.10.2018

VP Product&Distribution Europe

Andrea Vallejo Galarza

Summary of Contents for YSF

















































































Reviews: