background image

  

YORK VRF Air-Conditioner IOM

 

1

SAFETY CONSIDERATIONS 

Please read the “SAFETY CONSIDERATIONS” carefully 
before installing the air-conditioner equipment and be 
sure to install it correctly. 
The below notes include two types, both of which are 
related to safety and extremely important. Please read 
it carefully. 

WARNING

ĂĂ

Indicates a potentially 

hazardous situation, which, if not avoided, could result 
in death or serious injury. 

CAUTION

ĂĂ

Indicates a situation that may 

result in injury or equipment damage. According 
different condition, it also may result in the accidents 
of serious injury or other damage. 

z

Ask the specially trained personnel to carry out 
the installation work. Do not try to install the 
machine by yourself. 

z

Please perform the installation work in accordance 
with the steps in this manual. 
Improper installation may result in water leakage, 
electric shock or fire. 

z

Please install the air-conditioner on a foundation 
strong enough to withstand the weight of the unit. 
An insufficient strength foundation may result in 
the unit falling and causing injuries. 

z

Carry out the specified installation work after 
taking into account strong winds, typhoons or 
earthquakes.

Improper installation work may result in the unit 
falling and causing injuries. 

z

Make sure that a separate power supply circuit is 
provided for this unit and that all electrical work is 
carried out by specially trained personnel 
according local laws, regulations and this 
installation manual. 
An insufficient power supply capacity or improper 
electrical construction may lead to electric shock 
or fire. 

z

Make sure that the specified wires are used and all 
wiring is secure. No external forces act on the 
terminal connections or wires. 
Improper wiring connections or installation may 
result in electric shock or fire. 

z

When connecting the wiring of power supply, 
wired controller and remote controller, the wiring 
should be laid orderly so that the electric parts 
box lid can be securely fastened. 

z

If it appears refrigerant leakage during the 
installation process, open the doors and windows 
immediately to ventilate the room thoroughly.   

z

Toxic gas may be produced if the refrigerant comes 
in contact with fire such as a fan heater, stove or 
cooking device. 

z

Power off the unit before touching the electrical 
parts. 

z

Do not touch the switch with wet fingers. 
Touching the switch with wet fingers may cause 
electric shock. 

z

Be sure the air-conditioner is well grounded.   
Never connect the ground line with the gas pipe, 
water pipe, lightning conductor or telephone lines. 
Incomplete ground line may cause electric shock 
or fire. 

z

Be sure to install a ground leakage breaker. 
Failure to install a ground leakage breaker may 
result in electric shock or fire. 

z

Please follow the instructions in this manual to 
install drain pipe in order to ensure smooth 
drainage and insulate the pipe to avoid 
accumulating of condensate water. 
Improper drain pipe may result in water leakage 
and property damage. 

z

Install the air-conditioner unit, power supply 
wiring and connection wires at least 1m away 
from electrical equipments, such as TVs, radios, 
etc. to avoid electromagnetic waves interference 
or noise. 

z

Remote controller transmitting distance may be 
shortened than the expected one in the rooms 
with electronic fluorescent lamps (inverter or 
rapid start types).   
Install the indoor unit as far away from fluorescent 
lamps as possible. 

z

Do not install the air-conditioner in the following 
locations: 

(a) Where a mineral oil mist or an oil spray or 

vapor is produced, for example in a kitchen. 
Plastic parts may be deteriorated, corroded or 
damaged. 

(b) Where corrosive gas, such as sulfurous acid 

gas is produced. 
Corroded copper tubes or soldered parts may 
result in refrigerant leakage. 

(c) Where near machinery emitting 

electromagnetic waves. 
Electromagnetic waves may disturb the 
operation of the control system and result in a 
malfunction of the equipment. 

(d) Where it may have flammable gas leakage, 

carboform or floating flammable dust,     
volatile flammable material such as gasoline 
or thinner. 
Using air-conditioner in those places may 
result in fire. 

z

Do not touch heat exchanger fins 
Improper touching the heat exchanger fins may 
result in machine damage or personnel injury. 

z

Be very careful about the product transportation. 

䄺ਞ

WARNING 

Summary of Contents for YDCC018-115













Reviews: