Only necessary spray rod bracket and spay rod are installed for the humindifier before delivery,while main machine
will be installed on site.
The tank of dry steam humidifier is fixed on the panel through the flange and A-frame and the spray rod on the spray
rod bracket inside the unit. The installation of the enclosure and Dry Steam Humidifier connection diagram as shown in
the figure below. The connecting way of humidification system other accessories reference installation instructions of ST
Humidifier.
Outlet
Hunidifying
Unit
A-frame
Steam Trap
Hunidifying spray rod
III. Starting & Running
3-1 Electrical Diagram
1. Electrical wiring of dotted line users should prepare by themselves according to diagram 1 or diagram 2. There is no
such configuration for standard unit.
2. All electrical wiring should comply with local electrical installation standard.
3. Ground point of unit should be connected to earth terminal of control panel.
4. Check all power supply to confirm they accord with nameplate voltage or not; and power supply should be equipped
with applicable fuses.
5. Factory can offer supply power at 380V~415V 3N~50Hz, 460V 3N~60Hz, 380V 3N~60Hz or 230V 3N~60Hz.
28
Starting &
Running
