![background image](http://html2.mh-extra.com/html/york/tiwm006b21s/tiwm006b21s_engineering-manual_4192547010.webp)
FEATURES
1-2
TC-17006-rev.1
● Easy Maintenance and Flexible Design
(1) Face panel
The unit has been designed with a face panel and a slim body. The front panel is easy to clean and
should remain relatively dust free. It is easily removed and washed with water.
(2) Compact design width of 31-1/8 inches (790mm) (Only for TIWM006B21S and TIWM008B21S)
The compact design width of 31-1/8 inches (790mm) makes it possible to install in a narrow space.
(3) Applicable to centralized control
When each indoor unit is controlled with a wireless controller, there is no need to install a wired
controller with a centralized control system.
● Easy Installation
(1) DIP switch setting without removing the front panel
Other switch settings can be performed without removing the front panel.
Open the electrical box cover and perform the field electrical wiring work without removing the front
panel.
(2) Operation control with wireless controller
Each unit can be controlled with a wireless controller by
built-in receiver kit. A wired controller is also available
instead of a wireless operation.
A signal-receiving buzzer and indicator light signals the
wireless controller operation.
In an instance of group control with a wireless controller
(multiple units are controlled simultaneously with one
wireless controller), an optional receiver kit or wired
controller is required.
31-1/8 inches (790mm)
Electrical Box Cover
PCB for DIP Switch
Remove the DIP switch
cover to set the DIP
switches.
Open the front cover
to see the electrical box.
Remove the electrical box cover
to perform the on-site wiring work
of the terminal block.
Available Range for Wireless Controller
CS-NET
New Type
Beep