5167821-YTG-J-0518
Johnson Controls Ducted Systems
13
optional indoor blower motors that provide higher static
output and/or higher airflow.
•
CONVENIENCE OUTLET (POWERED/NON-POWERED)
–
Unit can be provided with an optional 120VAC GFCI outlet
with cover on the corner of the unit housing the compressors.
•
ELECTRIC HEAT
- Electric Heaters range from 3kW to
24kW and are available in all the voltage options of the
base unit.
•
PHASE MONITOR
- Designed to prevent damage in out-
of-phase condition.
•
COIL GUARD
- Designed to prevent condenser coil
damage.
•
BAS CONTROLS HARDWARE
- Include supply air
sensor, return air sensor, dirty filter indicator and air
proving switch.
•
DIRTY FILTER SWITCH
– This kit includes a differential
pressure switch that energizes the fault light on the unit
thermostat, indicating that there is an abnormally high-
pressure drop across the filters.
•
BREAKER
– An HACR breaker can be factory installed
on gas heat units or cooling units with electric heat.
•
DISCONNECT SWITCH
- A disconnect can be factory
installed on a cooling only units sized for the largest
electric heat available.
•
STAINLESS STEEL HEAT EXCHANGER
– For
applications in a corrosive environment, this option
provides a full stainless steel heat exchanger assembly.
•
SMOKE DETECTOR
– A smoke detector can be factory
mounted and wired in the supply and/or return air
compartments.
OTHER PRE-ENGINEERED ACCESSORIES AVAILABLE
•
ROOF CURB
- 14” and 8” high, full perimeter knockdown
curb, with hinged design for quick assembly.
•
BAROMETRIC RELIEF DAMPER
– (Unit mounted –
Downflow, Duct Mounted – Horizontal) – Contains a rain
hood, air inlet screen, exhaust damper and mounting
hardware. Used to relieve internal air pressure through
the unit during economizer operation.
•
PROPANE CONVERSION KIT
– Contains new orifices
and gas valve springs to convert from natural to L.P. gas.
•
-60ºF GAS HEAT KIT
– Provides an electric heat kit for
the gas compartment for use in extreme low ambient
conditions.
•
ECONOMIZER
(Downflow and Horizontal flow)
•
POWER EXHAUST
– (Unit mount – Downflow, Duct
mount – Horizontal flow)
•
DUAL ENTHALPY KIT
- Provides a second input to
economizer to monitor return air.
